Revetement de toits en tole inox(N° 04EU)

  Couverture 

Revetement de toits en tole inox(N° 04EU)

 Revetement de toits en tole inox revetu par  Nitrure de Titane

Hyper résistance de revêtement aux conditions atmosphériques et agents chimiques, 50 ans de garantie :

  • surface dur et résistante à rayer
  • forte adhésion au support
  • 4 couleurs possibles (et mélange des couleurs)
  • résistant au cintrage et pliage

Produit à utiliser aussi dans architecture moderne

Quelques réalisations.

Revetement de toits en tole inox revetu par  Nitrure de Titane (import d’Ukraine) - 1.Quelques réalisations.

Informations techniques. 

  • 1.1. The sheet should satisfy the requirements of ГОСТ 9.301, the present technical specifications and standard specimens.
  • 1.2. The process of titanium nitride application on the sheet is carried out according to the technological regulation ТИ 25270.00001 of the manufacturing works developed on the basis of the standard technological process under ОСТ 4.054.070, on the vacuum plants with electro-arc evaporators of “Spectrum 1A” type.
  • 1.3. Primary sheet indices should meet those stated in the table 1.

Table 1. Primary indices. 

Name of index

Unit of measure

Standard

1.

Color of coating

-

From goldish-straw to  goldish-yellow

2.

Homogeneity of coating color

-

Homogeneous

3.

Roughness of coating,

not more

mcm

Ra 2,5 (Rz 10)

4.

Coating appearance

-

Coating should be dull or bright (swelling and peeling of the coating are excluded)

5.

Adhesion of coating (durability of coating adhesion)

-

Coating should be coherent with substrate fast

6.

Durability of coating

years

50

7.

Sheet overall dimensions,

not more:

Length

Width

Thickness

mm

 

 

3000

1500

2

  • 1.4. Substrate overall dimensions and weight are chosen and checked by the customer.
  • 1.5. Indices (characteristics, properties) of functional purpose.
  • 1.5.1. Requirements towards substrate for decorative coating:
  • the sheet of stainless steel with homogeneous dull or bright surface of 04X18H10 grade under ГОСТ 5632; rough surface under ГОСТ 2789, mcm, not more than Ra 2,5 (Rz 10).
  • 1.5.2. Requirements towards the components of titanium nitride coating obtained in the result of ion-plasmous combination of titanium vapour with nitrogen in the process of vacuum evaporation: BT1-00 or BT1-0 titanium under ГОСТ 19807; industrial gaseous nitrogen of top grade under ГОСТ 9293.
  • 1.5.3. Peeling and/or swelling of the coating when bent, and scratching under the test are excluded.
  • 1.5.4. The thickness of decorative coating is not standardized. Coating is applied up to formation of the necessary goldish shade, which depends on time of spraying.
  • 1.5.5. The color of coating should conform to the standard specimen agreed with the customer.
  • 1.5.6. The standard specimen is manufactured out of the customer’s material.
  • 1.5.7. The appearance of coating should not degrade the substrate appearance.
  • 1.5.8. Decorative coating copies roughness, brightness, as well as defects of the substrate.

Transportation and storage

  • 5.1. Transportation and storage of the output should be carried out according to the requirements of ДСТУ 3058, ГОСТ 15150 and the present technical specifications.
  • 5.2. Sheets should be packed according to the requirements of item 1.6 of these technical specifications.
  • 5.3. Preparation of cargo for transportation should correspond to ГОСТ 26653.
  • 5.4. The terms of cargo transportation:air temperature from –500C up to +450C;air relative humidity not more than 98%; direct ingress of moisture on cargo is excluded.
  • 5.5. Cargo is transported by all closed carriers in accordance with the transport regulations currently in force on the given transport carrier, and technical specifications of cargo loading and fastening.
  • 5.6. When loading, piling of package with sheets is conceded.
  • 5.7. The conditions of package with sheets storing correspond to item 5.4 herein.
  • 5.8. The package with sheets is stored under the awning or in closed storehouses.
  • 5.9. When storing, piling of package with sheets is conceded.

Operation instructions

  • 6.1. Operation of sheets should satisfy the requirements of these technical specifications and be provided by the customer.
  • 6.2. The sheet is designed for operation under environmental conditions U1 in the industrial atmosphere II in accordance with ГОСТ 15150 at air temperature from –500C up to +450C.
  • 6.3. It is allowed to: cut the sheet on automatic guillotines; at that cover spray-coated surface with paraffined paper ГОСТ 9569; cut by hand shears on metal; bend in angles, at which the fracture of substrate does not occur; wear through the covered surface by natural clothes using any domestic detergents and solvents.
  • 6.4. It is excluded to: scratch the covered sheet surface by sharp and hard objects; clean the covered surface with the use of abrasives.

Manufacturer’s guarantees

  • 7.1. The manufacturer guarantees the conformity of sheet quality to the requirements of these technical specifications under observance by the customer of the requirements on transportation, storage, assembling and operation of these technical specifications.
  • 7.2. The warranty assurance is established for 50 years from the date of goods selling.
  • 7.3. The enterprise-manufacturer issues to the customer for a consignment the document about quality, the copy of durability test protocol and warranty coupon.

 

Privately owned enterprise “Scientific and Industrial Firm “LAD” is operating in the field of plasma and vacuum technologies on application of decorative coating of various materials and their nitrides and carboxides on metal, glass and ceramic ware.


It accomplishes the works on manufacture of domes, cupola crosses, church plate and other ware for decoration of religious and civil constructions. The coating has a wide color spectrum, in particular gold color.


Firm “LAD” offers new facing material of polished stainless steel with titanium nitride coating. By its spectral and optical characteristics the coating of titanium nitride is identical to natural gold and distinguishes by its high atmosphere resistance and mechanical durability, is essentially timeproof and in many times cheaper than gold coating applied by the leaf-gold method.


High operational properties of roofing and facing material meet the requirements of ТУ У 28.5-22800793-001-2004 of Ukraine. Decorative and protective properties are maintained during 50 years, which is confirmed by their testing on the action of industrial atmosphere according to Certificate of conformity № POCC UA. AЮ31.HO7149.


Technological methods used at vacuum and plasma coating provide high adhesion of the applied layer to the base.


Sheets withstand multiple deformations without peeling of the coating, can be used during punching. That gives possibility to use such material for carrying out roofing and facing works.


The coating has high thickness homogeneity and specified color uniformity along all surface of bulky ware.


The enterprise works constantly over introduction and improvement of the latest developments and technologies.